GardenTenders

Harvest Table

Project by Scott Hildenbrand posted 742 days ago 1235 views 0 times favorited 19 comments Add to Favorites Watch

I’d posted about wanting to do a table a long way back. I’d finally got to it this summer but then things went off kilter and I didn’t post about it.

Here’s the table in use.

I’d made this out of the base of an old metal break and standard treated 2×4s held together with decking screws.

I started off making an outside frame of the table top by cutting the boards on a 45 degree angle and screwing them together through the sides.

Once the picture frame style edge was done I cut two boards down to lay along the bottom which would not only support the table top boards, but also hold it onto the metal break, as you can see here.

With the two boards in place, all I had to do was cut the boards for the inside of the table top and start screwing them into place. Then with the full top finished I held it in place with mounting blocks (seen above) to ensure that the table top does not tip with weight or blow off in high wind.

You can see in the pictures, there is a 1/4” or so gap between each board. It is a garden table, used for holding harvest fruits, so I wanted to ensure good drainage after any rains.

All in all, rather happy with the table. It is utilitarian for sure, but the picture frame edge makes it look just a little pretty.. ;)

-- Planting Daylilies in Kentucky, zone 6b

View Scott Hildenbrand's profile

Scott Hildenbrand

1658 posts in 919 days
hardiness zone 6b

Project tags/keywords

garden table table

Embed This Project

GardenTenders Code

HTML Code

URL/IMG Code

Preview this project card


19 comments so far

View jroot's profile

jroot

3198 posts in 778 days
hardiness zone 5a

posted 742 days ago

The picture frame edge does indeed give it a nice look.

With the iron legs it should stand the test of time.

Good idea about the drainage as well.

I like it. Well done.

-- jroot

View MsDebbieP's profile (online now)

MsDebbieP

8102 posts in 1148 days
hardiness zone 5b

posted 742 days ago

this is excellent!
and I bet it looks fantastic in the yard, especially with that edge and those legs!

-- - Debbie, SW Ontario Canada (USDA Hardiness Zone: 5a) http://www.execulink.com/~yohan

View Scott Hildenbrand's profile

Scott Hildenbrand

1658 posts in 919 days
hardiness zone 6b

posted 742 days ago

You can see the table in this shot I’d posted in the other, erm, post.. ;)

It looks better without the gas cans beside it and when the yard is actually mowed.. Starting to look badly neglected. :(

Oh well, will see if I can get to mowing it today.

-- Planting Daylilies in Kentucky, zone 6b

View robertpaul's profile

robertpaul

29 posts in 887 days

posted 742 days ago

Fantastic!!
Having a background in some manufacturing, I love cast iron. Sturdy, strong, and it tends to stay put. Plus, this is recycling.

Now to make a paradox, how about painting the legs and adding gold pinstripe like the machines of old?

-- Earth laughs in flowers - Ralph Waldo Emerson

View MsDebbieP's profile (online now)

MsDebbieP

8102 posts in 1148 days
hardiness zone 5b

posted 742 days ago

oooh it does look fantastic there.
I was focused on the plants in your other posting and didn’t notice the table really.

neglected: pshaw!!! priorities!

-- - Debbie, SW Ontario Canada (USDA Hardiness Zone: 5a) http://www.execulink.com/~yohan

View Scott Hildenbrand's profile

Scott Hildenbrand

1658 posts in 919 days
hardiness zone 6b

posted 742 days ago

And ruin that beautiful rus..t….errr… patina? Never! ;)

-- Planting Daylilies in Kentucky, zone 6b

View MsDebbieP's profile (online now)

MsDebbieP

8102 posts in 1148 days
hardiness zone 5b

posted 742 days ago

the rustina is what makes it extra special ;)

-- - Debbie, SW Ontario Canada (USDA Hardiness Zone: 5a) http://www.execulink.com/~yohan

View MIKE CRIPPS's profile

MIKE CRIPPS

402 posts in 923 days

posted 742 days ago

THE METAL PART LOOKS LIKE A LATHE BED TO ME SCOTT IS IT ?
REGARDS MIKE

-- MIKE MILTON COMMON U.K.

View Bon's profile

Bon

5154 posts in 928 days
hardiness zone 5a

posted 741 days ago

Very nicely done Scott.We all need our tables outside for a million things.Yours should last you quite a few years.

-- Bon,Hastings,Ont.....zone 5a....Always room for one more

View Scott Hildenbrand's profile

Scott Hildenbrand

1658 posts in 919 days
hardiness zone 6b

posted 741 days ago

Mike, nope, no lathe.. It’s the base off a heavy metal break for bending sheet goods.

Bon, I’m hoping it outlasts me.. All things considered, it should.. 1” thick cast iron legs, treated top with plenty of drainage.. Should be good for a lifetime..

I’ve got to add a shelf to the bottom soon so the wife has a place to store garden tools and twine.

-- Planting Daylilies in Kentucky, zone 6b

View jroot's profile

jroot

3198 posts in 778 days
hardiness zone 5a

posted 741 days ago

That looks like a really prolific fig tree. What kind is that, Scott?

-- jroot

View Scott Hildenbrand's profile

Scott Hildenbrand

1658 posts in 919 days
hardiness zone 6b

posted 741 days ago

Not real sure, was here when we moved in. If I were to guess, I’d say either Flander or maybe Lattarula .. The other I’m fairly sure it’s a Brown Turkey, but may be Neveralla.

One of these days I’ll grab some fruit and sit down to study them and see if I can pinpoint what they are for sure.

-- Planting Daylilies in Kentucky, zone 6b

View jroot's profile

jroot

3198 posts in 778 days
hardiness zone 5a

posted 740 days ago

I don’t know the first two mentioned. I love figs. You can make some really good fig jam that is really good especially at Christmas. :)

-- jroot

View Catspaw's profile

Catspaw

243 posts in 945 days

posted 740 days ago

O.K., I’m pretty sure this is genetic. It’s in my nature to be this way. [rain on the parade] Trying to think first before typing. Ah, yes….

It is a nice job. Like the using of the Brake stand.

Also Patina Schmatina…..What’s so special about rust? I would second oldpaul’s paint with pinstripes. I luvs an old piece with a kinda dark pea green with gold pinstripes.

Leaving it natural, I would, however, coat it with some oil maybe once a year. The rust will grow if you don’t. You touch it or brush up against it and have big swathes of rust on your hands or pants legs. It won’t rust away in your lifetime, but, the oil will keep it more “seasoned” looking.

so here it is.

Treated wood? Food stuff? I would suggest using a table clothe during harvest dedicated for use on this table only (and remember which side is always down.)

[that wasn’t too bad. this thinking before typing is not as bad as i thought it would be.]

-- arborial reconfiguration specialist......Zone out....(USA 5)

View MsDebbieP's profile (online now)

MsDebbieP

8102 posts in 1148 days
hardiness zone 5b

posted 740 days ago

haha Catspaw you are so cute!

great tip re: the oil coating on the natural rustina look.

-- - Debbie, SW Ontario Canada (USDA Hardiness Zone: 5a) http://www.execulink.com/~yohan

View Scott Hildenbrand's profile

Scott Hildenbrand

1658 posts in 919 days
hardiness zone 6b

posted 739 days ago

Darn you and your rain.

The rust is stable, it doesn’t rub off at all so that’s not an issue.

Saving the paint and pinstripe for the mower when I get the air compressor fixed. Thinking flames.

Treated wood? 1.) non arsenic based, tis copper. 2.) extremely limited table time. If it transferred in 2 days, I’d phear for my life.

....

Now… No need to pussy foot around… ;)

-- Planting Daylilies in Kentucky, zone 6b

View XploreOrganics's profile

XploreOrganics

1370 posts in 1027 days
hardiness zone 5b

posted 739 days ago

I love the table Scott…Would have been a good entry into the LJ Summer Awards.

-- Xploreorganics, 5b Canada, LFD 06-20

View GrandmaT's profile

GrandmaT

5305 posts in 1026 days
hardiness zone 5

posted 739 days ago

GREAT table!!!!!!! Love the iron legs, they add such character!!!!

-- "A beautiful garden is a work of heart" -- Royal Oak, MI - Zone 5

View Daisycrzy's profile

Daisycrzy

18 posts in 986 days
hardiness zone 6

posted 704 days ago

Oh, this is what I’ve been wanting! Very nice!

-- "Where flowers bloom, so does hope," Lady Bird Johnson

You must be signed in to post the comments.

Your Online Garden - Your Support Is Greatly Appreciated - Your Gardening Showcase - 3 Ways To Help, Financially - Your Gardening Community

Gardening StoreApparel StoreMake a Donation
Bookmark And Share This Page

DISCLAIMER: All views and comments posted by members are not necessarily those of GardenTenders.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

LumberJocks.com :: woodworking showcase

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com